GM2A ELISA kit (Human)

SKU: SEL122Hu

Size: 96Tests

# of Times Cited in literature: 3

Prepare Time: 1-3 days(please inquire for mutiple units)

Target Name: GM2A

Target Full Name: GM2 Ganglioside Activator

Alternative Names: SAP-3; Cerebroside Sulfate Activator Protein; Sphingolipid Activator Protein 3

Target Species: Human

Uniprot: P17900

Gene ID: 2760

Featured Series: SE kit

Featured Series Function: Detects protein (regular version)

Specificity: Reactive with Human GM2A / GM2 Ganglioside Activator

Method: Colormetric

Detection principle: Double-antibody Sandwich

Detection range: 0.156-10ng/mL

Sensitivity: 0.064ng/mL

Assay Time: 3h

Sample Size: 100uL

Recommended/Predicted Sample Types: Serum, Plasma, Tissue Homogenates, Cell Lysates, Cell Culture Supernates and other Biological Fluids

Assay Precision: Intra-Assay: CV<10%, Inter-Assay: CV<12%

Reproducibility test menthod: Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level GM2 Ganglioside Activator (GM2A) were tested 20 times on one plate, respectively. Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level GM2 Ganglioside Activator (GM2A) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100

Storage: 4°C for 1 month/ -20°C for long-term(One year within shelf life)

Shelf-life: 12 months

Specificity: This assay has high sensitivity and excellent specificity for detection of GM2 Ganglioside Activator (GM2A). No significant cross-reactivity or interference between GM2 Ganglioside Activator (GM2A) and analogues was observed.

Stability: The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary: 1. Prepare all reagents, samples and standards; 2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C; 3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C; 4. Aspirate and wash 3 times; 5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C; 6. Aspirate and wash 5 times; 7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C; 8. Add 50µL Stop Solution. Read at 450nm immediately.

Test principle: The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to GM2 Ganglioside Activator (GM2A). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to GM2 Ganglioside Activator (GM2A). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain GM2 Ganglioside Activator (GM2A), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of GM2 Ganglioside Activator (GM2A) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Research Area: Immune molecule;

References Citing This Product: Human Urinary GM2-activator Protein as a Potential Biomarker for Lung Cancer

GM2-Activator Protein: A New Biomarker for Lung Cancer

LUNG CANCER BIOMARKER

Proteomic approaches in the discovery of potential urinary biomarkers of mucopolysaccharidosis type II