Use it to cut down error rates, or cut down your stress level, avoid necessary start-over (=waste in your time) in your experiments
The iTrack Pipette Tracking system is also compatible with audit trail in GLP and GMP test procedures, next generation sequencing (NGS).
-Contact us if you need assistance in qualification, verification and validation of the iTrack Pipette Tracking System in your procedures.
Features:
iTrack sensors detect pipetting actions
- you do not need to program pipetting protocols, just use it.
-if you prefer to set up a protocol and follow it during pipetting, you can do so.
-you do not need to press any button, just do your pipetting. (This is different from some other products out there, which does need you to pipette and then press a button each time to pipette. )
You have options for sensor scanning layer configuration:
1. The Higher layer is used for 96-well plates or tubes configured in this format
2. The Lower layer is used for 384-well microplates
You can also choose to either use a single- channel pipette or a multi-channel (8-channel or 12-channel) pipettes.
Specifications
| Items | Specifications |
| Compatible Pipette | Single-, 8-, & 12-channel (fixed space) |
| Compatible Tip | 0.1 - 1,000 µL |
| Compatible Microplate / Tube | 96-Well Microplate (height < 23.5 mm) |
| (PCR, ELISA, storage…) | 384-Well Microplate (height < 11 mm) |
| 8-tube / 12-tube strips | |
| Control System | Android Tablet |
| CPU & RAM | Quad-Core A9 1.6GHZ, 1G DDR3 RAM |
| Storage | 8 GB NAND Flash, MicroSD supports 64GB |
| Ports | MicroSD, MicroUSB, power, headset |
| Display | 8” Capacitive Touch Screen, 1,024 x 768 pixel |
| Cameras | Front / 2MP Back |
| Operation Voltage | 100-240V / 0.3A (Tablet) |
| Operation Power Consumption | 5V / 0.5A |
| Battery | 3.7V – 3500mAh |
| Scan Light Source | IR Light-Emitting Diode |
| >Scan Frequency | 200 - 500 Hz |
| Detection Time | 0.5 - 3 sec. |
| Size | 255mm x 230mm x 54mm (10” x 9” x 2”) |
| Weight | >1.9 Kg (4.1 lb) |